Ciphet Tested Pulverizer 5 HP
Ciphet Tested Pulverizer
| Name of Machine | Power Operated Pulverizer |
| Make | Sidhharth |
| Model | SE-95 |
| Manufactured by | Sidhharth Enterprises, Village Nandauri, Tehsil Dhamdha, Dist. Durg, Chhattisgarh-490025 |
| Test Conducted by | Post-harvest Machinery & Equipment Testing Centre (PHMETC), ICAR-CIPHET, Ludhiana-141004, Punjab |
| Approved By | Department of Agriculture, Co-operation and Farmers Welfare (DAC&FW), Ministry of Agriculture and Farmers Welfare, Govt. of India. |
What is Ciphet Teste
SCOPE OF TEST
The scope of test was to check and assess the following:
1.1 General
a) Checking of specifications.
b) Hardness & Chemical analysis of materials from different portions of the Power operated pulverizer.
c) Visual observations and checking provisions for adjustments.
d) Commodity tested: Dry turmeric whole
1.2 Test at no-load
a) Power consumption
b) Visual observations
1.3 Test at load
a) Visual observations
b) Determination of
i) Particle size
ii) Rated capacity
iii) Power consumption
c) Long-run test
TEST PROCEDURE/ CODES
No BIS Test Code is available for the Power operated pulverizer. The test procedure as mutually agreed between the testing authority and applicant has been followed to test the Power operated pulverizer. The following test codes were referred to test the Power operated pulverizer Machine.
(i) IS 4333 (Part 2): 2002: Methods of analysis for foodgrains: Part 2 Determination of Moisture Content (First Revision)
(ii) IS 1442:1997: Agricultural Produce Milling Machinery-Burr Mill-Test Code
(iii) IS 460 (Part 1)-1985: Specifications for test sieves: Part 1 wire cloth test sieve (third revision)
(iv) IS 2322-2010: Spices and Condiments- Chillies, Whole and Ground (Powdered)-Specification (third revision)
METHOD OF SELECTION
The machine was selected via virtual meeting and then submitted for the test by the applicant at the Institute. Hence, the method of selection is virtual sampling via video conference.
Specification of Ciphet Tested Pulverizer 5 HP
| 1. General | ||
| a) Make | : | Sidhharth |
| b) Model | : | SE-95 |
| c) Type | : | Electricity Operated |
| d) Total weight of the machine, kg | : | 85 Kg |
| 2. Power Unit | : | |
| a) Type of prime mover | : | Electric Motor |
| b) Motor power | : | Main Motor: 5 hp Three / Single Phase |
| c) Type of drive | : | V-belt pulley |
| 3. Main Drive | : | |
| a) Type | : | Electricity/ Power-Operated |
| b) Size of main shaft (L × D), mm | : | 520 × 30 |
| c) No. & size of belts | : | 02, B71 |
| d) Size of motor pulley (Φ), mm | : | 228 (Double v-groove) |
| e) Size of the main pulley (Φ), mm | : | 102 (Double v-groove) |
| f) Type of belt-tightening arrangement | : | Yes, the sliding base of the electric motor |
| g) No. and type of bearing on main shaft, mm | : | UCP 207 (02), Ball bearing |
| 4. Feeding Arrangement | : | |
| a) Method of feeding | : | Manual |
| b) Type of drive for feed mechanism | : | NA |
| c) Location of feeding hopper | : | At the top of the machine |
| d) Arrangement of feeding control | : | NA |